|
|
Garage with Fuel Station
Borkesz, Michael ; Pilgr, Milan (referee) ; Barnat, Jan (advisor)
Bachelor thesis presents the structural design of a load bearing steel structure of garage with roof construction of adjoining fuel station. The object is located in periphery area of Uherske Hradiste city, near Jarosov district. The ground plan dimensions are: 36 x 32 meters garage hall; 20 x 20 meters fuel station roofing. Heights of both construction tops are same – 10 meters above the surface. As the main material supporting elements was designed steel S355. The main supporting structure compose of trusses, which are hinged supported by columns. The roof deck is heat insulated, supported by purlins. The wall deck is simillar to roof deck, except of the front wall, which is partly composed of glass casing. At the both sides of garage hall are designed gates for vehicles. The roof deck of fuel station roof construction composes from one single trapezoidal sheet, also supported by purlins. The work contains structural design of individual elements, including mutual joints and anchoring. Calculations are performed according to standards of EN.
|
|
|
Statical solution of reinforced concrete structure
Stehno, Pavel ; Ivana,, Švaříčková (referee) ; Zlámal, Martin (advisor)
In this bachelor thesis I study designing and appraising monolithic ceiling slab, which is statically solved by two - way slab. In order to dimension this load - bearing structure to effect of bending moments will be applied computer simulation. The solution is checked by simple method of total moments. Very important part of this thesis is structural analysis affecting pushing through the ceiling slab. Pushing will be soluted by manual analysis, results will be compared with output values of computer analysis. Critical state sagging of the ceiling slab is solved very marginally. The main purpose of this thesis consists of creation technical report, structural analysis and design documentation of soluted structure.
|
|
|
Proposal for the increased effectiveness of production operation of sheet metal covers at ISOTRA company
Hykel, Lukáš ; Blachut, Bohumír (referee) ; Kubík, Roman (advisor)
The thesis deals with the optimization of production lines cover sheets for external blinds. The aim of this work is to propose appropriate investment in line for expansion of capacity and the reduction of risks in the form of cooperation. To achieve the objective I propose two alternative solutions. Combination of these two variants has been optimized with regard to investment in capacity expansion, reduce risk and achieve a fast return on investment. The conclusion describes the individual prices of investment items and annual profit from the newly formed water jet technology.
|
|
|
Finding kinematic quantities of a mechanism and a structural analysis of its members after blockage
Zvozil, Ondrej ; Vosynek, Petr (referee) ; Fuis, Vladimír (advisor)
Diplomová práca, ktorá vznikla v spolupráci so spoločnosťou AUFEER DESIGN (AFD), sa zaoberá analýzou konkrétneho stieračového mechanizmu automobilu. Najprv je uvedená stručná história stieračov. Stieracie sústavy sú potom rozdelené podľa ich usporiadania a spôsobu pohonu. V nasledujúcej kapitole je formulovaná problémová situácia, problém a systém podstatných veličín. Kinematické veličiny kľúčových bodov mechanizmu sú určené analytickým aj numerickým prístupom. Výpočtový model pre kinematickú analýzu je vyvinutý v Matlabe a SimMechanics. Ďalšia časť je venovaná vytváraniu konečno-prvkového modelu v programe ANSA. Všetky deformačne-napäťové analýzy sú vykonané v programe Abaqus. Prvá z nich je parametrická štúdia, ktorá odhaľuje kritické polohy mechanizmu z hľadiska tlakového namáhania určitých súčastí. Mechanizmus v kritických polohách je potom zaťažovaný so zablokovanými ramenami stieračov. Nakoniec sú urobené lineárne analýzy straty vzpernej stability súčastí, u ktorých môže nastať, nasledované nelineárnymi analýzami so zahrnutými imperfekciami.
|
|
|
Piston of a spark-ignition engine for 3-D printing
Zelko, Lukáš ; Dlugoš, Jozef (referee) ; Drápal, Lubomír (advisor)
The goal of the thesis was to design a piston manufactured by conventional method and subsequently adjusted one for additive manufacturing. Beside the designs, thermo-structural model was created for both pistons, considering maximal loading of the engine. Analysis evaluation showed the possibility of further application of the new technology in comparison to current one, within automotive industry.
|
|
|
Computational simulation of pass rolling
Hacek, Samuel ; Šebek, František (referee) ; Petruška, Jindřich (advisor)
Táto diplomová práca sa zaoberá možnosťami výpočtového modelovania valcovania v kalibroch pomocou metódy konečných prvkov. Na začiatku je formulovaná motivácia pre písanie práce a problémová situácia, nasledovaná zostavením systému podstatných veličín. Ďaľšia kapitola popisuje rôzne spôsoby valcovania ako aj samotný valcovací proces. Dôraz je kladený na popis tradičného návrhu kalibrov. Nasledujúca kapitola sa zaoberá teóriou plasticity, plastickým chovaním materiálu a jeho modelovaním v konečnoprvkovom prostredí Abaqus, ktoré je použité vo výpočtovej časti práce. Predstavené sú viaceré modely plasticity, ako aj modely tvárneho porušovania, používané na posúdenie tvárniteľnosti či simuláciu šírenia tvárnej trhliny v materiáli. Práca pokračuje kapitolou zameranou na metódu konečných prvkov, najmä jej explicitný algoritmus, využívaný vo výpočtovej časti práce. Ďaľšia časť je venovaná popisu základných princípov fotoelasticimetrie, tradičnej experimentálnej metódy. Tieto kapitoly zahŕňajú aj popis konečnoprvkovej a experimentálnej fotoplastickej analýzy konkrétneho prípadu valcovania v kalibroch, riešené v predchádzajúcom článku. Použitý výpočtový model je základom nového konečnoprvkového modelu, ktorého tvorbe je predmetom nasledujúcej kapitoly. Naviac sú vytvorené aj dve varianty pôvodného, zjednodušeného výpočtového modelu. S použitím vytvorených výpočtových modelov sú vykonané štrukturálne analýzy a vyhodnotené viaceré výsledky, následne zhrnuté a porovnané s pôvodnými výpočtovými a experimentálnymi výsledkami. Rozbor porovnania výsledkov a zhodnotenie použiteľnosti a spoľahlivosti jednotlivých výpočtových modelov tvoria záver práce.
|
|
|
Pulse flow of liquid in flexible tube
Komoráš, Miroslav ; Šedivý, Dominik (referee) ; Klas, Roman (advisor)
This master’s thesis is dealing with analysis of fluid flow pulse in a flexible tube representing e.g. an artery in a human body. In ANSYS program, 3D simulations were performed, and these are so-called interrelated FSI analysis. In Maple software, 1D simulations of fluid flow in the tube were performed for various thin-walled and thick-walled variants. The aim is using these programs to determine the flow rates and pressures in the tube, its wall deformation and stress. Therefore, the theoretical part deals mainly with basic equations of flow dynamics, linear and nonlinear models and rotationally symmetric vessels. In the computational part are described individual procedures in the mentioned programs.
|
|
|
Analysis of structural and proportional criteria of Romanesque and Pre-Romanesque rotundas.
Kříž, Pavel ; Kalousek, Lubor (referee) ; Unger,, Josef (referee) ; Vlček, Milan (advisor)
Topic of this dissertation thesis follows previous dissertations dealing with reconstructions of historical buildings that were successfully defended at Institute of Building Structures, Faculty of Civil Engineering, Brno University of Technology. The thesis deals with Romanesque and Pre-Romanesque round churches, called rotundas, that were built between 9th and 13th century in the historical territory of Great Moravia. Churches of similar shape can be also found in surrounding countries, but only scarcely. By the time of origin these rotundas were among the oldest masonry buildings built within borders of contemporary Czech Republic. Later some rotundas were destroyed and are known only thanks to the archaeological findings or written records. Some are still waiting to be discovered. Surviving rotundas are the oldest masonry buildings in Czech Republic, therefore it can be said that they belong to the most valuable historical buildings in the country. Preserved rotundas were often modified or rebuild in some way. Thanks to their age, origins of many of these buildings are shrouded in a mystery, which is one of the reasons why they attract attention of many researchers – archaeologists, historians and art historians. Many questions arise from their research. These questions have interdisciplinary character and finding the answers requires cooperation of specialists in different fields. One of these fields is building engineering. This dissertation thesis deals with proportional and structural analysis of Pre-Romanesque and Romanesque rotundas. For the proportional analysis author focused on verifying of some of the hypotheses of other researchers connected to the Romanesque rotundas. These include hypothesis dealing with use of historical units for the design of rotundas, hypothetical use of proportional canon, or some universal sets of proportional ratios of vertical and horizontal dimensions. The proportional analysis also helped with verification of some hypothe
|
|
|
Design of prestressed bridge structure
Tylčer, Jan ; Rybák, Vít (referee) ; Klusáček, Ladislav (advisor)
This thesis describes the design of a road bridge in Trutnov through local communication. It is designed prestressed dvoutrámová construction of two fields with twin inclined struts. It developed a detailed static analysis and the bridge is considered to I. and II. limit state according to European standards - Eurocode. It is prepared detailed drawings.
|
|
|
Numerical analysis of bio-mimetic concept for active flow control on wing surface
Čermák, Jakub ; Navrátil, Jan (referee) ; Popela, Robert (advisor)
V této diplomové práci je provedena optimalizace profilu křídla vybaveného elastickou klapkou umístěnou na horní straně profilu. Optimalizační proces je proveden s vyžitím CFD prostředků, konkrétně URANS metody. V prvních kapitolách je popsána historie vývoje křídla vybaveného pohyblivými klapkami. Práce pokračuje popisem a zdůvodněním volby numerické metody. Vytvoření geometrie a výpočetní sítě je krátce popsáno. V práci je také prezentována validace a verifikace dané výpočetní metody. Případová studie je zaměřena na profil LS(1)-0417mod vybavený 20%, 30% a 40% dlouhou, pevnou kalpkou na různých úhlech náběhu. Aerodynamická účinnost společně s proudovým polem je analyzována. Je provedena nelineární pevnostní analýza s využitím MKP programu za účelem vyhodnocení ohybové tuhosti a deformovaného tvaru elastické klapky tak, aby byly splněný podmínky nutné pro automatické vychýlení.
|
guest ::
